Visonicom WiFi EZCast dongle VMD-EZ154 is the latest all-in-one WiFi display adapter that supports AirPlay, Miracast (Wi-Fi Display), and DLNA simultaneously working on Android, iOS, Windows and Mac OS, with the universal wireless display HDMI TV dongle users can easily cast 1080p video, photo, game and files from PC/Notebook, Android phones/tablet PCs, iPAD/iPhone, to HDTV or projector through HDMI port wirelessly(EZCast for all users, or EZAir for iPAD/iPhone users, or Miracast for Andorid phone/Android pad users), or push all the video, photo, and files to from the above mentioned devices to HDTV or projector (DLNA).

Product Features
Multimode support: Miracast, DLNA, Airplay
Cross Platform support: iOS, Android, Windows, Mac OS
Highly integrated Actions SoC (600MHz)
Simple to operate
Most compact size and lower consumption under 2w
Fast connection & low latency for superior user experience
H.264 1080P full HD video decode
LPCM Audio Decode
HDMI v1.3 video output
HDCP 2.x
Auto channel selection with high quality video stream
WiFi module supports IEEE 801.11 b/g/n up to 150Mbps data transfer rate with WiFi Direct capability
Flexible power using TV standard USB port (need to support up to 400mA) or external USB power supply

Specification:

Hardware Feature
CPU Actions (600MHz)
RAM  DDR-128MB
ROM NAND Flash 128MB
OS  Linux
Wi-Fi Module 802.11b/g/n 150Mbps 2.4GHz
Software Feature
EZCast Support Windows/Mac OS/Android/iOS
DLNA:DMP Display photo, audio and videos base on DLNA protocol for Windows/Android/IOS
Miracast (EZMirror) Native support Miracast function(certified with WiFi display)
Airplay (Air Cast) Support iOS with Air Cast
Soft AP Cell phone can connect through EZCast-AP to another WiFi router
Remote Control EZCast app for Android/Windows/IOS/MAC 
UI Standard GUI
Interface Definition
AV Output HDMI 1.3 type A male
USB USB HSOT *1 for firmware update only
Power 5V/500MAUSB cable USB type A to Micro USB
LED Working Status

For more product info please visit: www.ezcast-wifidisplay.com

Additional Info

  • Protocol Support Miracast/WiFi Direct, DLNA, AirPlay, EZCast
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 150Mbps
  • OS Support Android, iOS, Windows, Mac OS, Chrome OS
  • Chipset Actions AM8251

Visonicom EZCast VMD-EZ151i is a universal WiFi display HDMI dongle that supports Miracast (Wi-Fi Direct), DLNA and Airplay all-in-one adapter that supports Miracast, DLNA and Airplay simultaneously, so that with universal WiFi display TV adapter users can easily cast the video, photo, game and files from PC/Notebook, Android phones/tablet PCs, iPAD/iPhone, to HDTV or projector through HDMI port wirelessly(EZCast for all users, or EZAir for iPAD/iPhone users, or Miracast for Andorid phone/Android pad users), or push all the video, photo, and files to from the above mentioned devices to HDTV or projector (DLNA).

Product Features
Multimode support: Miracast, DLNA, Airplay
Cross Platform support: iOS, Android, Windows, Mac OS
Highly integrated Actions SoC (600MHz)
Simple to operate
Most compact size and lower consumption under 2w
Fast connection & low latency for superior user experience
H.264 1080P full HD video decode
LPCM Audio Decode
HDMI v1.3 video output
HDCP 2.x
Auto channel selection with high quality video stream
WiFi module supports IEEE 801.11 b/g/n up to 150Mbps data transfer rate with WiFi Direct capability
Flexible power using TV standard USB port (need to support up to 400mA) or external USB power supply

Specification:

Hardware Feature
CPU Actions (600MHz)
RAM  DDR-128MB
ROM NAND Flash 128MB
OS  Linux
Wi-Fi Module 802.11b/g/n 150Mbps 2.4GHz
Software Feature
EZCast Support Windows/Mac OS/Android/iOS
DLNA:DMP Display photo, audio and videos base on DLNA protocol for Windows/Android/IOS
Miracast (EZMirror) Native support Miracast function(certified with WiFi display)
Airplay (Air Cast) Support iOS with Air Cast
Soft AP Cell phone can connect through EZCast-AP to another WiFi router
Remote Control EZCast app for Android/Windows/IOS/MAC 
UI Standard GUI
Interface Definition
AV Output HDMI 1.3 type A male
USB USB HSOT *1 for firmware update only
Power 5V/500MAUSB cable USB type A to Micro USB
LED Working Status

For more product info please visit: www.ezcast-wifidisplay.com

Additional Info

  • Protocol Support Miracast/WiFi Direct, DLNA, AirPlay, EZCast
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 150Mbps
  • OS Support Android, iOS, Windows, Mac OS, Chrome OS
  • Chipset Actions AM8251

Visonicom VHR307B is a featured 200mW long range wireless router 2T2R 300Mbps high power 23dBm provides long range, high performance WiFi Internet access over extended coverage with 3*5dBi high gain antennas featuring MIMO 2T2R technology, working at 2.4GHz frequency band.

The high power WiFi router is equipped with advanced 2.4GHz WiFi power amplifiers(PA) to provide up to 1,000 square meters of high performance Wi-Fi coverage with the 2T2R MIMO Wi-Fi technology for ultra-fast wireless speed.

The high transmission power up to 23dBm(200mW) of the long range wireless router makes the Wi-Fi transmission extending extremely long range, and the high receiver sensitivity up to -95 dBm enables the high power WiFi router to communicate with client devices (WiFi adapters of PC, mobile devices, etc) stably. High transmission power with high receiver sensitivity ensures quality and stable wireless connection at home or office.

The RJ45 WAN port of the high power Wi-Fi router supports internet access through DHCP(Dynamic IP), PPPoE, Static IP, WISP, and PPPoE(Internet)+DHCP(IPTV) through only one physical WAN port for both internet access and IPTV broadcasting.

The 802.11n high power AP router VHR307B is easy to configure with the setup wizard. It can work as wireless gateway(AP), wireless bridge, AP Client(repeater), and wireless ISP (WISP). It supports Multi SSID/Multi AP, QoS, WDS, WPS. It is specially designed for higher sensitivity, longer coverage and the wireless transmission power is adjustable.

Basic Features:

* High transmission power up to 23dBm(200mW)
* High receiver sensitivity up to -92dBm
* Multimode support: Wireless gateway, wireless bridge, AP Client and wireless ISP (WISP)
* WAN support: DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE(Internet)+DHCP(IPTV)
* Multi SSID/Multi AP support
* IPv6 support
* vLAN support
* WISP support
* WDS support
* 5dBi high gain antenna
* Wireless Transmission Power Adjustable
* Automatic transmission rate detection network and transform
* QoS support
* WEP/WPA(TKIP)/WPA2(AES)/WPA2 Mixed support
* WPS support
* Fully compatible with IEEE802.11b/g/n.

Specifications: 

Wireless
Standard IEEE802.11b, IEEE802.11g, IEEE802.11n
Operation Mode Gateway/Bridge/AP Client/Wireless ISP
Data Rate Up to 300Mbps
Frequency Range 2.1~2.4835GHz
Operating Channels 1~11 (USA, Canada)
1~13 (Europe) 
1~14 (Japan),
According to country list
Spread Spectrum DSSS
Modulation type OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Transmission Distance Indoor up to 100m
outdoor up to 300m (depends on environment)
Receive Sensitivity@PE> 11n : -80dBm@10% PER
11g : -85dBm@10% PER
11b: -92dBm@8% PER
Transmit Power 11n :20dBm
11g : 23dBm
11b : 23dBm
Data Transfer Rate 802.11n: Up to 300Mbps
802.11g: Up to 54Mbps
802.11b: Up to 11Mbps
Encryption 64/128 bit WEP, WPA/WPA2/TKIP/AES encryption
Hardware
Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
Interface 1*10/100M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED Power, WLAN, WAN, LAN*4
Antenna 3*external 5dBi high gain antenna
Power Supply DC 5v/1A
Software
WAN Type DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE+DHCP
Port Forwarding Virtual Severs, Port Triggering, UPnP, DMZ
QoS WMM, Bandwidth filtering
Access Control IP/MAC/Domain Filtering
IGMP Snooping
VPN Pass-through PPTP, L2TP, IPSec
Others
Environment Operating Temperature: -0°C~40°C
Storage temperature: -20°C~70°C
Work Humidity: 10% ~ 90% RH Non-condensing
Storage Humidity: 0% ~ 95% RH Non-condensing

Additional Info

  • Chipset Boradcom BCM5357
  • Firmware Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 300Mbps
  • WiFi Power 23dBm 200mW High Power
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP
  • LAN Port RJ45 * 4*100Mbps
  • USB Port USB2.0*1

Visonicom VHR307M is a featured 2T2R high power wireless router 300Mbps 200mW(23dBm) provides long range, high performance wireless Internet access over wider coverage with 5dBi high gain antennas featuring MIMO 2T2R technology, working at 2.4GHz frequency band..

The long range WiFi router is armed with advanced 2.4GHz wireless amplifiers and 3 5dBi high gain antennas to provide up to 1,000 m2 of high performance wireless coverage with the 2T2R MIMO Wi-Fi technology for ultra-fast wireless speed.

The high transmission power up to 23dBm(200mW) enables the WiFi transmission extending particular long range, and the high receiver sensitivity up to -95 dBm makes the high power WiFi router communicate with client devices (WiFi adapters of PC, mobile devices, etc) stably. High transmission power with high receiver sensitivity ensures quality and stable wireless connection at home or office.

The RJ45 WAN port of the high power WiFi router supports DHCP(Dynamic IP), PPPoE, Static IP, WISP, and PPPoE(Internet)+DHCP(IPTV) through only one physical WAN port for both internet access and IPTV broadcasting.

The wireless-n long range AP router VHR307M is simple to configure with the setup wizard. It can work as wireless gateway, wireless bridge and wireless ISP (WISP). It supports Multi SSID/Multi AP, QoS, WDS, WPS. It is specially for high sensitivity, long coverage and the wireless transmission power is adjustable.

Basic Features:

* High transmission power up to 23dBm(200mW)
* High receiver sensitivity up to -92dBm
* Multimode support: Wireless gateway, wireless bridge, AP Client and wireless ISP (WISP)
* WAN support: DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE(Internet)+DHCP(IPTV)
* Multi SSID/Multi AP support
* IPv6 support
* vLAN support
* WISP support
* WDS support
* 5dBi high gain antenna
* Wireless Transmission Power Adjustable
* Automatic transmission rate detection network and transform
* QoS support
* WEP/WPA(TKIP)/WPA2(AES)/WPA2 Mixed support
* WPS support
* Fully compatible with IEEE802.11b/g/n

Specifications: 

Wireless
Standard IEEE802.11b, IEEE802.11g, IEEE802.11n
Operation Mode Gateway/Bridge/AP Client/Wireless ISP
Data Rate Up to 300Mbps
Frequency Range 2.1~2.4835GHz
Operating Channels 1~11 (USA, Canada)
1~13 (Europe) 
1~14 (Japan),
According to country list
Spread Spectrum DSSS
Modulation type OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Transmission Distance Indoor up to 100m
outdoor up to 300m (depends on environment)
Receive Sensitivity@PE> 11n : -80dBm@10% PER
11g : -85dBm@10% PER
11b: -92dBm@8% PER
Transmit Power 11n :20dBm
11g : 23dBm
11b : 23dBm
Data Transfer Rate 802.11n: Up to 300Mbps
802.11g: Up to 54Mbps
802.11b: Up to 11Mbps
Encryption 64/128 bit WEP, WPA/WPA2/TKIP/AES encryption
Hardware
Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
Interface 1*10/100M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED Power, WLAN, WAN, LAN*4
Antenna 3*external 5dBi high gain antenna
Power Supply DC 5v/1A
Software
WAN Type DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE+DHCP
Port Forwarding Virtual Severs, Port Triggering, UPnP, DMZ
QoS WMM, Bandwidth filtering
Access Control IP/MAC/Domain Filtering
IGMP Snooping
VPN Pass-through PPTP, L2TP, IPSec
Others
Environment Operating Temperature: -0°C~40°C
Storage temperature: -20°C~70°C
Work Humidity: 10% ~ 90% RH Non-condensing
Storage Humidity: 0% ~ 95% RH Non-condensing

Additional Info

  • Chipset Mediatek MT7620A
  • Firmware Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 300Mbps
  • WiFi Power 23dBm 200mW High Power
  • Internet Access Mode Static IP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP
  • LAN Port RJ45 * 4*100Mbps
  • USB Port USB2.0*1

Visonicom VWS151 USB WiFi storage dongle is a mini and easy‐to-use 150Mbps 1t1R USB WiFi stick with flash drive of 8GB capacity. It can also work as an soft AP router when the driver and utility is properly installed. Once you plug in VWS151 WiFi flash drive on a computer that already linked to the internet by UTP cable, it will turn your cable-networked computer into an AP and you can access internet wirelessly with other smart device especially for the smart phones and tablet PCs.

VWS151 USB WiFi dongle with storage also works as a 8G WiFi USB drive, so that it is possible to use the WiFi flash disk to extend its function such as WiFi cloud storage, VOD, etc...

Key Features
Mediatek MT7601 1T1R 150Mbps 802.11b/g/n 2.4G
Support Soft AP, WiFi Direct, WAPI
Build‐in 8GB Storage
Wi‐Fi encryption by WPA, WPA2, WPA2 Mixed
Support 20MHz/40MHz band width
Auto recognize & connection for Andriod & iOS products
Low power consumption and power management
Support OS: Windows XP 32/64bit, 2000, Vista32/64bit, Windows 7 32/64bit, Linux
USB2.0 interface as the power supply..

Specifications:

Absolute Maximum Rating
Items Parameter Max Rating
T-store Storage temperature 20 ~70
T-operation Operation temperature 0 ~ 40
H-store Storage humidity 5~90%RH no condensing
H-operation operation humidity 10~90%RH no condensing
ESD Electrostatic discharge tolerance 4kV
Receiver Characteristics for 2.4GHz Operation
Symbol Rate IEEE Citation Sensitivity
Min Nom Max
802.11b 11 Mbps   82dBm ‐84dBm 86dBm
802.11g 6 Mbps   83dBm ‐85dBm 87dBm
802.11g 54 Mbps   66dBm ‐68dBm 71dBm
802.11n 15Mbps   79dBm ‐81dBm 85dBm
802.11n 150Mbps   62dBm ‐64dBm 67dBm
Transmitter Characteristics for 2.4GHz operation
Standard Output power
Min Nom Max
802.11b 14dBm 15dBm 17dBm
802.11g 13dBm 14dBm 15dBm
802.11n 12dBm 13dBm 14dBm
Typical Power Consumption [2.4GHz operation]
Mode/Rate[Mbps] Typical Current Consumption[mA]
Continuous Receive Continuous Transmit
802.11b, 11Mbps 46 235
802.11g, 6Mbps 49 230
802.11n, 54Mbps 50 180
802.11n,150Mbps 51 155
Remark VDD = 5V VD33A=3.3V,VD33D=3.3V,VD12A=1.2V,VD12D=1.2V

 

Additional Info

  • Interface USB2.0
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 150Mbps
  • Transmission Power Standard

Visonicom VHR303R is a 2T3R 300Mbps high power wireless router 800mW(29dBm) provides long range, high performance wireless Internet access over extremely wider coverage.

VHR303R long range WiFi router is equipped with advanced dual 2.4GHz wireless amplifiers and 3 detachable high gain antennas to provide up to 3,000 m2 of high performance Wi-Fi coverage with the 2T3R MIMO Wi-Fi technology for ultra-fast wireless speeds.

The high transmission power up to 29dBm(800mW) enables the WiFi transmission extending particular long range, and the high receiver sensitivity up to -95 dBm makes the high power WiFi router communicate with client devices (WiFi adapters of PC, mobile devices, etc) stably. High transmission power with high receiver sensitivity ensures quality and stable wireless connection at home or office.

Extreme Range Wi-Fi Coverage
Ensure long range wireless Internet access to your home or office. Dual high power amplifiers and 3 high gain antennas provide the power to add up to 3,000 m2 of amplified wireless coverage.

Penetrate Walls and Eliminate Dead Spots
High transmission power and high receiver sensitivity provide powerful Wi-Fi coverage that easily penetrates walls and Wi-Fi obstructions to provide Wi-Fi coverage in hard to reach areas. The long range WiFi router is great for providing powerful wireless coverage for larger homes, backyards, offices and warehouses.

Simple Setup and Multimode Support
The configuration UI of the high power WiFi router is very clear and simple for everybody, though all the functions and features are there. Multiple operation modes(Gateway, Bridge, WISP, AP Client) supports flexible Wireless LAN implementation.

Specifications:

Model VHR303R (4M/32M)
Standards IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11n (300 Mbps Wireless LAN)
IEEE 802.1x (Network Access Control)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General Ethernet port: 5 RJ45 10/100 Mbps data port; one WAN and four LAN interface
Flash: 4 MB
Memory: 32 MB SDRAM
Frequency range 2.400 - 2.483 GHz
Modulation technologies 802.11b: Direct sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
Data rates IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
IEEE 802.11n (MCS0-15: up to 300 Mbps)
Output power 802.11n: 25 dBm +/- 1.5 dBm @300 Mbps
802.11g: 25 dBm +/- 1.5 dBm @54 Mbps
802.11b: 28 dBm +/- 1.5 dBm @11 Mbps
Receiver sensitivity 11n (300 Mbps) MCS0-15: -73 dBm
11g (54 Mbps) OFDM: -73 dBm
11b (11 Mbps) CCK: -95 dBm
Operation modes Gateway mode
Bridge mode(Bridge AP, Bridge Client, Bridge WDS, Bridge WDS + Repeater)
AP Converter(WISP) mode
AP Client (universal repeater) mode
Wireless security WEP encryption (64/128 bit)
WPA TKIP
WPA2 AES
WPA2 mixed
802.1x Authentication
Client access control through media access control (MAC) filter
Antenna Three 5dBi dipole antenna
Power 12V, 1.25A / 1.5A through RJ-45 connector. Maximum input Voltage =48V
LEDs Power
LAN Link/Act
Environmental Operating temperature: 0°C - 50°C
Operating humidity: 10 - 95% RH, non-condensing
Power Adaptor: 12V 1A

 

Additional Info

  • Chipset Realtek RTL8196C
  • Firmware Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 300Mbps
  • WiFi Power 29dBm 800mW High Power
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP
  • LAN Port RJ45 * 4*100Mbps
  • USB Port N/A

VRP303R wireless repeater is a universal 2t2r 300Mbps Wi-Fi range extender can easily increase the WiFi signal coverage of your Wi-Fi network for better wireless connection in homes with many rooms or multiple floors. The Wi-Fi extender has a built-in 110~240v to DC power adapter with detachable EU/US power plug in a compact design, so that it can be plugged directly into an electrical outlet for convenient implementation.

The 802.11n stylish WiFi AP repeater can also work as an AP (Access Point). The web UI of the wireless range extender is simple to configure. The power switch of the Wi-Fi repeater is convenient to power on/off when necessary.

Specifications:

Standards IEEE 802.11b IEEE 802.11g IEEE 802.11n
Interface 1 * 10/100Mbps Ethernet LAN port
WPS button
Power switch
Reset button
2 * internal antenna (2T2R)
CPU Realtek RTL8196E
Memory 4MB ROM
32MB RAM
Operation Mode Repeater, AP
Data Rates 11b: 1/2/5.5/11Mbps
11g: 6/9/12/24/36/48/54Mbps
11n (20MHz): MCS0-15, up to 144Mbps
11n (40MHz): MCS0-15, up to 300Mbps
Frequency Band 2.4000 - 2.4835GHz
Output Power(w/o antenna gain) 11b: 17±1.5dBm
11g: 15±1.5dBm
11n (20MHz): 14±1.5dBm
11n (40MHz): 13±1.5dBm
Sensitivity 11b @ 11Mbps: -84±2dBm
11g @ 54Mbps: -71±2dBm
11n (20MHz) @ MCS15: -68±2dBm
11n (40MHz) @ MCS15: -64±2dBm
Humidity Operating humidity: 10 - 90% (non-condensing)
Storage humidity: max. 95% (non-condensing)
Temperature Operating temperature: 0 - 40°C
Storage temperature: -20 - 60°C
Power Built-in 5V, 1A power module (AC110-240v input)
Power plug Detachable power plug(EU and/or US type)
Dimensions L75*W52*H46 mm
Package Content VRP303R Wireless AP Repeater, 1PCS
QIG(Quick Installation Guide),1PCS

Additional Info

  • Mount Type Wall
  • Chipset Realtek 8196E
  • Operation Mode AP+Repeater
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 300Mbps
  • Power Level Standard
  • Power Supply AC 110-24v

VCP303M is a 800mW high power 2T2R 300Mbps wireless ceiling mount AP(Access Point) with or without PoE(Power over Ethernet) support, which offers users extended range, stronger penetration, more secure network management and simpler connection.

VCP303M PoE ceiling AP high power provides longer coverage and at least 3 floors penetration. Standard PoE interoperable of 802.3af standard makes internet connection more flexible.

VCP303M ceiling AP high power is designed as a smart high power ceiling-mounted access point which will not interfere with your interior decoration. Only 3-step setting makes the implement simpler. VCP303M is the right choice for home, small business and coverage for public area.

To facilitate multiple ceiling AP implementation in large area or different rooms, we offer management software working in Windows to control and configure the ceiling APs one by one or by group simply, or the ceiling AP can be controlled by AC.

Specifications:

Software Features
System Requirement
System Windows Windows7, XP, 2000, NT, Me, 98, Mac OS X (10.4+)
Access Method Web Based (HTTP 1.0 / 1.1)
Browser Compatibility Microsoft IE 6.0 or above, Firefox 2.0 or above
Status
System Status System Information System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
Current IP Setting IP Address, Subnet Mack, Default, Gateway, DHCP, DNS
Current Wireless Setting Operation mode, Wireless Mode, Channel/Frequency, L2 Isolation, MSSID Setting
Client List List current associated clients. Show only authorized and associated clients 
System Log Displays a list of events triggered
Wireless Function List
Operation Mode AP
802.11 mode options b/g/n 20/40MHz
Channel setting Manual
Auto / Best Channel Selection
Transfer rate setting Auto and Manual
Output Power Control High / Medium / Low
Multiple BSSID (Multi AP)  4 BSSID for 2.4GHz
Security WEP WEP(64/128 bit)
WPA/WPA2 TKIP/AES
Hidden ESSID  
MAC address filtering MAC address filtering (Both in WLAN and LAN)
L2 Isolation  
802.1x Authentication MD5/ TLS/ TTLS, PEAP (Nice to Have)
802.1x Supplicant TTLS, PEAP (Nice to have)
LAN Settings IP(check validity and DHCP server IP range)
DHCP server DHCP Range, Lease Time, Client list
SNMP SNMP V1/V2C - SNMP Active: Disabled / Enabled
- SNMP Version : V1/V2c/ALL
- Read Community
- Set Community
- System Location
- System Contract
MIBI,MIBII - Trap Active : Disabled / Enabled
Private MIB - Trap Manager IP 
Administration User Name (set as “admin”)
Password (can be changed by user)
Confirmed Password
Backup/ Restore Setting Save Current Setting
Restore Saved Setting
Reset to Factory Default 
Firmware Upgrade Firmware Upgrade
Hardware Specifications
General
MCU Ralink RT3052F
Memory 64MB
Flash 8MB
Diameter * Height 120mm * 36mm
Physical Interface LAN: 1 * 10/100 Fast Ethernet RJ-45 (802.3af PoE supported)
Reset button
Power Jack (DC12v input)
LED Definition Power 1
WLAN 1
LAN 1
Adapter 12V/1A
Wireless Specifications
Frequency Band 2.4002.484 GHz(11b, 11g, 11n)
Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 11Ch for North America, 14Ch for Japan, 13Ch for Europe
Wireless Setting Operation Mode: – AP / WDS
Wireless Mode: – 11b/ 11g /11n
Channel Selection: (Setting varies by Country)
Channel Bandwidth: (Auto, 20Mhz, 40Mhz)
Transmission Rate: - 11n only ,11b/g/n mix ,11b only ,11b/g
Receive Sensitivity (Typical)  2.412 ~ 2.472 GHz (11b) up to -90 dBm
2.412 ~ 2.472 GHz (11g) up to -88 dBm
2.412 ~ 2.472 GHz (11n) up to -85 dBm
Transmit power 11b 1Mbps - 11Mbps 29dBm
11g 6Mbps - 9Mbps 29 dBm
12Mbps - 18Mbps 28 dBm
24Mbps - 36Mbps 24 dBm
48Mbps - 54Mbps 23 dBm
11n MCS 0-1 / 8-9 26 dBm
MCS 2-3 / 10-11 25 dBm
MCS 4-5 / 12-13 24 dBm
MCS 6-7 / 14-15 23 dBm
Antenna Internal 5dBi antenna
ENVIRONMENT AND MECHANICAL
Temperature Range 0 to 50° C - Operating, -20 to 60 ° C - Storage
Humidity (non-condensing) 90% or less – Operating, 90% or less - Storage
PACKAGE CONTENT
VCP303M High Power Ceiling AP * 1
Power Adapter (12V/1A) * 1

 

Additional Info

  • Mount Type Celing
  • Chipset Ralink 3052
  • Operation Mode AP, Repeater
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 300Mbps
  • Power Level High Power 29dBm
  • Power Supply DC 12v, PoE 24v, PoE 48v

VCP302M is a 300Mbps 2T2R wireless ceiling mount AP(Access Point) of 800mW high power with or without PoE(Power over Ethernet) support, which offers users longer range, stronger penetration, more secure network management and simpler connection.

VCP302M PoE high power ceiling-mounted AP provides extended coverage and at least 3 floors penetration. Standard PoE interoperable of 802.3af standard makes internet connection more flexible.

VCP302M is designed as a smart high power ceiling mount access point which will not violate your interior decoration. Only 3-step setting makes the implement easier. VCP302M is the perfect choice for home, small business and coverage for public area.

To facilitate multiple ceiling AP implementation in large area or different rooms, we offer management software working in Windows to control and configure the ceiling APs one by one or by group simply, or the ceiling AP can be controlled by AC.

Specifications:

Software Features
System Requirement
System Windows Windows7, XP, 2000, NT, Me, 98, Mac OS X (10.4+)
Access Method Web Based (HTTP 1.0 / 1.1)
Browser Compatibility Microsoft IE 6.0 or above, Firefox 2.0 or above
Status
System Status System Information System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
Current IP Setting IP Address, Subnet Mack, Default, Gateway, DHCP, DNS
Current Wireless Setting Operation mode, Wireless Mode, Channel/Frequency, L2 Isolation, MSSID Setting
Client List List current associated clients. Show only authorized and associated clients 
System Log Displays a list of events triggered
Wireless Function List
Operation Mode AP
802.11 mode options b/g/n 20/40MHz
Channel setting Manual
Auto / Best Channel Selection
Transfer rate setting Auto and Manual
Output Power Control High / Medium / Low
Multiple BSSID (Multi AP)  4 BSSID for 2.4GHz
Security WEP WEP(64/128 bit)
WPA/WPA2 TKIP/AES
Hidden ESSID  
MAC address filtering MAC address filtering (Both in WLAN and LAN)
L2 Isolation  
802.1x Authentication MD5/ TLS/ TTLS, PEAP (Nice to Have)
802.1x Supplicant TTLS, PEAP (Nice to have)
LAN Settings IP(check validity and DHCP server IP range)
DHCP server DHCP Range, Lease Time, Client list
SNMP SNMP V1/V2C - SNMP Active: Disabled / Enabled
- SNMP Version : V1/V2c/ALL
- Read Community
- Set Community
- System Location
- System Contract
MIBI,MIBII - Trap Active : Disabled / Enabled
Private MIB - Trap Manager IP 
Administration User Name (set as “admin”)
Password (can be changed by user)
Confirmed Password
Backup/ Restore Setting Save Current Setting
Restore Saved Setting
Reset to Factory Default 
Firmware Upgrade Firmware Upgrade
Hardware Specifications
General
MCU Ralink RT3052F
Memory 64MB
Flash 8MB
Diameter * Height 120mm * 36mm
Physical Interface LAN: 1 * 10/100 Fast Ethernet RJ-45 (802.3af PoE supported)
Reset button
Power Jack (DC12v input)
LED Definition Power 1
WLAN 1
LAN 1
Adapter 12V/1A
Wireless Specifications
Frequency Band 2.4002.484 GHz(11b, 11g, 11n)
Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 11Ch for North America, 14Ch for Japan, 13Ch for Europe
Wireless Setting Operation Mode: – AP / WDS
Wireless Mode: – 11b/ 11g /11n
Channel Selection: (Setting varies by Country)
Channel Bandwidth: (Auto, 20Mhz, 40Mhz)
Transmission Rate: - 11n only ,11b/g/n mix ,11b only ,11b/g
Receive Sensitivity (Typical)  2.412 ~ 2.472 GHz (11b) up to -90 dBm
2.412 ~ 2.472 GHz (11g) up to -88 dBm
2.412 ~ 2.472 GHz (11n) up to -85 dBm
Transmit power 11b 1Mbps - 11Mbps 29dBm
11g 6Mbps - 9Mbps 29 dBm
12Mbps - 18Mbps 28 dBm
24Mbps - 36Mbps 24 dBm
48Mbps - 54Mbps 23 dBm
11n MCS 0-1 / 8-9 26 dBm
MCS 2-3 / 10-11 25 dBm
MCS 4-5 / 12-13 24 dBm
MCS 6-7 / 14-15 23 dBm
Antenna Internal 5dBi antenna
ENVIRONMENT AND MECHANICAL
Temperature Range 0 to 50° C - Operating, -20 to 60 ° C - Storage
Humidity (non-condensing) 90% or less – Operating, 90% or less - Storage
PACKAGE CONTENT
VCP302M High Power Ceiling AP * 1
Power Adapter (12V/1A) * 1

 

Additional Info

  • Mount Type Celing
  • Chipset Ralink 3052
  • Operation Mode AP, Repeater
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 300Mbps
  • Power Level High Power 29dBm
  • Power Supply DC 12v, PoE 24v, PoE 48v

VCP301M is a high power 300Mbps 2T2R wireless ceiling mount AP(Access Point) with PoE(Power over Ethernet) support, which offers users extended coverage, stronger penetration, more secure network management and simpler connection.

VCP301M PoE high power ceiling AP provides extended coverage and at least 3 floors penetration in your environment. Standard PoE interoperable of 802.3af makes internet connection more flexible.
VCP301M is designed as a ceiling mount access point which will not violate your interior decoration. Only 3-step setting makes the implement simpler. VCP301M is the perfect choice for internet coverage for public area, home and small business.

To facilitate multiple ceiling AP implementation in large area or different rooms, we offer management software working in Windows to control and configure the ceiling APs one by one or by group simply, or the ceiling AP can be controlled by AC.

Specifications:

Software Features
System Requirement
System Windows Windows7, XP, 2000, NT, Me, 98, Mac OS X (10.4+)
Access Method Web Based (HTTP 1.0 / 1.1)
Browser Compatibility Microsoft IE 6.0 or above, Firefox 2.0 or above
Status
System Status System Information System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
Current IP Setting IP Address, Subnet Mack, Default, Gateway, DHCP, DNS
Current Wireless Setting Operation mode, Wireless Mode, Channel/Frequency, L2 Isolation, MSSID Setting
Client List List current associated clients. Show only authorized and associated clients 
System Log Displays a list of events triggered
Wireless Function List
Operation Mode AP, Repeater
802.11 mode options b/g/n 20/40MHz
Channel setting Manual
Auto / Best Channel Selection
Transfer rate setting Auto and Manual
Output Power Control High / Medium / Low
Multiple BSSID (Multi AP)  4 BSSID for 2.4GHz
Security WEP WEP(64/128 bit)
WPA/WPA2 TKIP/AES
Hidden ESSID  
MAC address filtering MAC address filtering (Both in WLAN and LAN)
L2 Isolation  
802.1x Authentication MD5/ TLS/ TTLS, PEAP (Nice to Have)
802.1x Supplicant TTLS, PEAP (Nice to have)
LAN Settings IP(check validity and DHCP server IP range)
DHCP server DHCP Range, Lease Time, Client list
SNMP SNMP V1/V2C - SNMP Active: Disabled / Enabled
- SNMP Version : V1/V2c/ALL
- Read Community
- Set Community
- System Location
- System Contract
MIBI,MIBII - Trap Active : Disabled / Enabled
Private MIB - Trap Manager IP 
Administration User Name (set as “admin”)
Password (can be changed by user)
Confirmed Password
Backup/ Restore Setting Save Current Setting
Restore Saved Setting
Reset to Factory Default 
Firmware Upgrade Firmware Upgrade
Hardware Specifications
General
MCU Ralink RT3052F
Memory 64MB
Flash 8MB
Diameter * Height 120mm * 36mm
Physical Interface LAN: 1 * 10/100 Fast Ethernet RJ-45 (802.3af PoE supported)
Reset button
Power Jack (DC12v input)
LED Definition Power 1
WLAN 1
LAN 1
Adapter 12V/1A
Wireless Specifications
Frequency Band 2.4002.484 GHz(11b, 11g, 11n)
Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 11Ch for North America, 14Ch for Japan, 13Ch for Europe
Wireless Setting Operation Mode: – AP / WDS
Wireless Mode: – 11b/ 11g /11n
Channel Selection: (Setting varies by Country)
Channel Bandwidth: (Auto, 20Mhz, 40Mhz)
Transmission Rate: - 11n only ,11b/g/n mix ,11b only ,11b/g
Receive Sensitivity (Typical)  2.412 ~ 2.472 GHz (11b) up to -90 dBm
2.412 ~ 2.472 GHz (11g) up to -88 dBm
2.412 ~ 2.472 GHz (11n) up to -85 dBm
Transmit power 11b 1Mbps - 11Mbps 29dBm
11g 6Mbps - 9Mbps 29 dBm
12Mbps - 18Mbps 28 dBm
24Mbps - 36Mbps 24 dBm
48Mbps - 54Mbps 23 dBm
11n MCS 0-1 / 8-9 26 dBm
MCS 2-3 / 10-11 25 dBm
MCS 4-5 / 12-13 24 dBm
MCS 6-7 / 14-15 23 dBm
Antenna Internal 5dBi antenna
ENVIRONMENT AND MECHANICAL
Temperature Range 0 to 50° C - Operating, -20 to 60 ° C - Storage
Humidity (non-condensing) 90% or less – Operating, 90% or less - Storage
PACKAGE CONTENT
VCP301M High Power Ceiling AP * 1
Power Adapter (12V/1A) * 1

 

Additional Info

  • Mount Type Celing
  • Chipset Ralink 3052
  • Operation Mode AP, Repeater
  • WiFi Frequency 2.4GHz
  • WiFi Data Rate 300Mbps
  • Power Level High Power 29dBm
  • Power Supply DC 12v, PoE 24v, PoE 48v

Product Shortcut

Quick Contact

Hotline: 86-755-2791-0303
Email:market#visonicom.com
Skype: visonicom
ICQ: 77681269
QQ: 36554529